Q:\LOAD\nt4D\I386\winnt32.exe /s:Q:\LOAD\nt4D\I386 /u:B:\unattend.txt /t:c

Q:\LOAD\nt4s\I386\winnt32.exe /s:Q:\LOAD\nt4s\I386 /u:b:\unattend.txt /t:c

Q:\LOAD\nt4D\I386\winnt32.exe /s:Q:\LOAD\nt4D\I386 /u:B:\unattend.txt /t:c /r:c:\support\i386 /e:%SystemDrive%\i386\system32\shutdown.exe /r

OEMBlankAdminPassword = 1


NT4s
[LicenseFilePrintData]
   AutoMode = PerServer or PerSeat
   AutoUser = xxxx or PerServer  (where XXXX is the number of licenses purchased)


;[Unattended]
;Method = Express|Custom
;NtUpgrade = Yes|No
;Win31Upgade = Yes|No
;TargetPath = *|<Path Name>|Manual
;OverwriteOemFilesOnUpgrade = Yes|No
;ConfirmHardware = Yes|No
;OEMPreinstall = Yes|No
;NoWaitAfterTextMode =  (0 = stop, 1 = Reboot)
;NoWaitAfterGuiMode = (0 = stop, 1 = Reboot)
;FileSystem = ConvertNTFS|LeaveAlone
;ExtendOemPartition = (0 = no, 1 = Yes)
				

; Descriptions are from the COMPUTER Section of TXTSETUP.SIF
; ======================================================
; ComputerType = "AST Manhattan SMP","RETAIL"
; ComputerType = "Compaq SystemPro Multiprocessor or 100%
;    Compatible","RETAIL"
; ComputerType = "Corollary C-bus Architecture","RETAIL"
; ComputerType = "Corollary C-bus Micro Channel Architecture","RETAIL"
; ComputerType = "IBM PS/2 or other Micro Channel-based PC","RETAIL"
; ComputerType = "MPS Uniprocessor PC","RETAIL"
; ComputerType = "MPS Multiprocessor PC","RETAIL"
; ComputerType = "MPS Multiprocessor Micro Channel PC","RETAIL"
; ComputerType = "NCR System 3000 Model 3360/3450/3550","RETAIL"
; ComputerType = "Olivetti LSX5030/40","RETAIL"
; ComputerType = "Standard PC","RETAIL"
; ComputerType = "Standard PC with C-Step i486","RETAIL"
; ComputerType = "Wyse Series 7000i Model 740MP/760MP","RETAIL"

;KeyBoardLayout = <Layout description>
;  Example;
;  KeyBoardLayout = "US-International"

;[GuiUnattended]========================================

;[GuiUnattended]
;OemSkipWelcome = (0 = no, 1 = Yes)
;OemBlankadminPassword = (0 = no, 1 = Yes)
;TimeZone = <Time Zone>
; The following are strings for AdvServerType
; AdvServerType = LANMANNT
; AdvServerType = LANSECNT
; AdvServerType = SERVERNT

; Definition of Server Type
; LANMANNT=PDC
; LANSECNT=BDC
; SERVERNT=Standalone

;[UserData]============================================

;[UserData]
;FullName = <user name>
;OrgName = <company name>
;ComputerName = <computer name>
;ProductID = <product ID> (CD-key)
;
; Note if PID is for an OEM version of NT the algorithm for the
; PID is the following xxxyy-OEM-0000016-zzzzz
;
; x = Julian calendar date for the day
; y = The current year (last two digits)
; z = Any numerics combination you want
;
;
;[LicenseFilePrintData]=================================

;[LicenseFilePrintData]
; AutoMode = PerServer or PerSeat
; AutoUser = xxxx or PerServer


;[NetWork]==============================================

;[NetWork]
;Attend = Yes|No
; This value should not be specified for a complete unattended install
;
;JoinWorkGroup = <workgroup name>
;JoinDomain = <Domain name>
;CreateComputerAccount = <user_name, password>
;InstallDC = <domain name>
;InstallAdapters = <Install adapters section>
;
; If not AUTODETECTED do not use
; this option
;
;DetectAdapters = <detect adapters section>|""
;
;InstallProtocols = <Protocol(s) list section>
;InstallServices = <Sevices list section>
;InstallInternetServer <internet information server parameters>
;DoNotInstallInternetServer = Yes|No
;[detect adapters section]
;
; Only used if the adapter
; AUTODETECTED by setup.
;
;DetectCount = <Number of detection attempts (I believe the max is 4)>
;LimitTo = <netcard inf option>
;Example;
; LimitTo = DECETHERWORKSTURBO

;[Install adapters section]
; Examples;
;   DECETHERWORKSTURBO = DECETHERWORKSTURBOParams
;   EE16 = EE16Params

;[DECETHERWORKSTURBOParams]
;InterruptNumber = 5
;IOBaseAddress = 768               ;Note!! all numbers in these sections
;MemoryMappedBaseAddress = 851968  ;are converted from hex to decimal
;!AutoNetInterfaceType = 1         ;(768 = 300h). You can get these values
;!AutoNetBusNumber = 0             ; from the registry of a computer with
                                   ;the adapter installed.

;[EE16Params]
;!AutoNetInterfaceType = 1
;Transceiver = 3
;!AutoNetBusNumber = 0
;IoChannelReady = 2
;IoBaseAddress = 784
;InterruptNumber = 10

;[Protocol(s) list section]
; OEM File listing for protocols
;
; TCPIP - OEMNXPTC.INF
; NETBEUI - OEMNXPNB.INF
; IPX - OEMNSVNW.INF
; DLC - OEMNXPDL.INF
; Point to Point Protocol - OEMNXPPP.INF
; STREAMS - OEMNXPST.INF
; Apple Talk - OEMNXPSM.INF
;

; TC = TCPIPParams
; NBF = NetBeuiParams
; NWLNKIPX = NWLINKIPXParams
; DLC = DLCParams
; RASPPTP = RASPPTPParams
; STREAMS = STREAMSParams
; ATALK = ATALKParams

;[TCPIPParams]
; DHCP = yes|no
; IPAddress = www.xxx.yyy.zzz
; Subnet = www.xxx.yyy.zzz
; Gateway = www.xxx.yyy.zzz
; DNSServer = www.xxx.yyy.zzz, www.xxx.yyy.zzz, www.xxx.yyy.zzz
; WINSPrimary = www.xxx.yyy.zzz
; WINSSecondary = www.xxx.yyy.zzz
; DNSName = <DNS name server>
; ScopeID = This_is_the_scope_id

;[NetBeuiParams]
; No parameters needed

;[NWLINKIPXParams]
; No parameters needed

;[DLCParams]
; No parameters needed


;[RASPPTPParams]
; No parameters needed

;[STREAMSParams]
; No parameters needed

;[ATALKParams]
; Need to figure out how to set the default zone and adapter. From
; testing this does work once finished. Reason is for printing. Many
; high end publishing companies used Apple printers on their networks
; and would need this protocol to print.

;[Sevices list section]
; NWWKSTA = InstallCSNW
; SNMP = InstallSNMP
; RAS = InstallRemoteAccess
; NETMON = InstallNetMon
; STCPIP = InstallSimpleTCP
; TCPPRINT = InstallTCPPrint
; INETSTP = InstallInternetServer
; SAP = InstallSAP

;[InstallCSNW]
; !DefaultLocation = <server location (usaully preferred server)>
; !DefaultScriptOption = 0|1|3
;   0 = No scripts will be run
;   1 = Netware 3.X level scripts
;   3 = Either Netware 3.X or 4.X level scripts can be run

;[InstallSNMP]
; Accept_CommunityName = Name1, Name2, Name3 (Max is 3)
; Send_Authentication = yes | no
; AnyHost = yes | no
; Limit_Host = host1, host2, host3 (Max is 3)
; Community_name = <Community name>
; Traps = IPaddress | IPXaddress (max of 3 IP or IPX addresses)
; Contact_Name = <user name>
; Location = <computer location>
; Service = Physical, Applications, Datalink, Internet, EndToEnd

;[Modem]================================================

;[Modem]
;InstallModem = <Modem parameter section>
; Example;
;   InstallModem = MyModem
;
;[ModemParameterSection]
;<Com Port Number> = <Modem description>
; Example;
;   Com2 = "Hayes V-Series Ultra Smartmodem 9600"
;
;
;[InstallRemoteAccess]
;
; PortSections = <port section name>
; DialoutProtocols = TCP/IP|IPX|NetBEUI|All
; DialInProtocols = TCP/IP|IPX|NetBEUI|All
; NetBEUIClientAccess = Network|ThisComputer
; TCPIPClientAccess = Network|ThisComputer
; IPXClientAccess = Network|ThisComputer
; UseDHCP = Yes|No
; StaticAddressBegin = <IP address>  (used only if UseDHCP = No)
; StaticAddressEnd = <IP address>   (used only if UseDHCP = No)
; ExcludeAddress = <IP address1 - IP address2>
;    The above is used to exclude a range of addresses when a range has
;    been assigned manually.  Requires that StaticAddressBegin and
;    StaticAddressEnd are specified already.
;
; ClientCanRequestIPAddress = Yes|No
; AutomaticNetworkNumbers = Yes|No
; NetworkNumberFrom <IPX Net Number>
; AssignSameNetworkNumber = Yes|No
; ClientsCanRequestIpxNodeNumber = Yes|No

; [port section name]
; PortName = COM1|COM2|COM3-COM25
; DeviceType = modem  (presently only value available)
; DeviceName = "Hayes V-Series Ultra Smartmodem 9600"
; PortUsage = DialOut|DialIn|DialInOut

;[InstallNetMon]

;[InstallSimpleTCP]

;[InstallTCPPrint]

;[<internet information server parameters>]
;
; (0 = do not install, 1 = install)
; InstallINETSTP = 0|1
; InstallFTP = 0|1
; InstallWWW = 0|1
; InstallGopher = 0|1
; InstallADMIN = 0|1
; InstallMosaic = 0|1
; InstallGateway = 0|1
; InstallDNS = 0|1
; InstallHELP = 0|1
; InstallSMALLPROX = 0|1
; InstallCLIENTADMIN = 0|1
; WWWRoot = <www root directory i.e.  C:\INETSRV\WWW>
; FTPRoot = <FTP root directory i.e.  C:\ftp>
; GopherRoot = <gopher root directory i.e  C:\INETSRV\GOPHER>
; InstallDir = <Internet services install directory>
; EmailName = <E-mail Name i.e. john@org.com>
; UseGateway = 1
; GatewayList = \\gateway1 \\gateway2 \\gateway3
; DisableSvcLoc = 1
; GuestAccountName <name>
; GuestAccountPassword <password string>

;[InstallSAP]

;[DisplayDrivers]=======================================

; [DisplayDrivers]
; <Display driver description> = Retail|Oem

;[Display]==============================================

;[Display]
;
; For this to fully automate, the ConfigureAtLogon can not be used at all.
;
; ConfigureAtLogon = (0 = during setup, 1 = at first logon)
;
;BitsPerPel = <Valid bits per pixel>
;XResolution = <Valid X resolution>
;YResolution = <Valid Y resolution>
;VRefresh = <Valid refresh rate>
;Flags = <Valid flags>
;AutoConfirm = (0 = do not use specified settings, 1 = use pre-defined
;settings)
;InstallDriver (0 = No, 1 = Yes)
;InfFile = <inf file name 1>,<inf file name 2>,.......
;InfOption = <inf option 1>,<inf option 2>,.........
; Example:
;   InstallDriver = 1
;   InfFile = S3.inf, Matrox.inf
;   InfOption = s3 765, Millennium 3D

;[KeyBoardDrivers]======================================

;[KeyBoardDrivers]
;"XT, AT, or Enhanced Keyboard (83-104 keys)" = "RETAIL"

; Descriptions are from the KEYBOARD Section of TXTSETUP.SIF
; ======================================================
; "XT, AT, or Enhanced Keyboard (83-104 keys)" = "RETAIL"

;[PointingDeviceDrivers]================================

;[PointingDeviceDrivers]

; Descriptions are from the MOUSE Section of TXTSETUP.SIF
; ======================================================
; "Microsoft Mouse Port Mouse (includes BallPoint)" = "RETAIL"
; "Logitech Mouse Port Mouse" = "RETAIL"
; "Microsoft InPort Bus Mouse" = "RETAIL"
; "Microsoft Serial Mouse" = "RETAIL"
; "Microsoft BallPoint Serial Mouse" = "RETAIL"
; "Logitech Serial Mouse" = "RETAIL"
; "Microsoft (Green Buttons) or Logitech Bus Mouse" = "RETAIL"
; "No Mouse or Other Pointing Device" = "RETAIL"
; "Microsoft Mouse Port Mouse (includes BallPoint)" = "RETAIL"

;[MassStorageDrivers]===================================

;[MassStorageDrivers]

; Descriptions are from the SCSI Section of TXTSETUP.SIF
; ======================================================
; "Adaptec AHA-151X/AHA-152X or AIC-6260/AIC-6360 SCSI Host Adapter" =
; "RETAIL"
; "Adaptec AHA-154X/AHA-164X SCSI Host Adapter" = "RETAIL"
; "Adaptec AHA-174X EISA SCSI Host Adapter" = "RETAIL"
; "Adaptec AHA-274X/AHA-284X/AIC-777X SCSI Host Adapter" = "RETAIL"
; "Adaptec AHA-294X/AHA-394X or AIC-78XX PCI SCSI Controller" = "RETAIL"
; "Adaptec AHA-2920 or Future Domain 16XX/PCI/SCSI2Go SCSI Host Adapter" =
; "RETAIL"
; "AMD PCI SCSI Controller/Ethernet Adapter" = "RETAIL"
; "AMIscsi SCSI Host Adapter" = "RETAIL"
; "BusLogic SCSI Host Adapter" = "RETAIL"
; "BusLogic FlashPoint" = "RETAIL"
; "Compaq 32-Bit Fast-Wide SCSI-2/E" = "RETAIL"
; "Compaq Drive Array" = "RETAIL"
; "Dell Drive Array" = "RETAIL"
; "DPT SCSI Host Adapter" = "RETAIL"
; "Future Domain TMC-7000EX EISA SCSI Host Adapter" = "RETAIL"
; "Future Domain 8XX SCSI Host Adapter" = "RETAIL"
; "IBM MCA SCSI Host Adapter" = "RETAIL"
; "IDE CD-ROM (ATAPI 1.2)/Dual-channel PCI IDE Controller" = "RETAIL"
; "Mitsumi CD-ROM Controller" = "RETAIL"
; "Mylex DAC960/Digital SWXCR-Ex Raid Controller" = "RETAIL"
; "NCR 53C9X SCSI Host Adapter" = "RETAIL"
; "NCR C700 SCSI Host Adapter" = "RETAIL"
; "NCR 53C710 SCSI Host Adapter" = "RETAIL"
; "Symbios Logic C810 PCI SCSI Host Adapter" = "RETAIL"
; "Olivetti ESC-1/ESC-2 SCSI Host Adapter" = "RETAIL"
; "QLogic PCI SCSI Host Adapter" = "RETAIL"
; "MKEPanasonic CD-ROM Controller" = "RETAIL"
; "Sony Proprietary CD-ROM Controller" = "RETAIL"
; "UltraStor 14F/14FB/34F/34FA/34FB SCSI Host Adapter" = "RETAIL"
; "UltraStor 24F/24FA SCSI Host Adapter" = "RETAIL"

;[DetectedMassStorage]==================================

;[DetectedMassStorage]

;[OEMAds]===============================================

;[OEMAds]
;Banner = <text string> (must be enclosed in quotes and have the string
;'Windows NT')
; Example;
;  Banner = "My own Windows NT setup"
;Logo = <file name>
;Background = <file name>

;[OEMBootFiles]=========================================

;[OEMBootFiles]

Winnt32

Performs an installation or upgrade of Windows NT 4.00.
winnt32 [/s:sourcepath] [/i:inf_file] [/t:drive_letter] [/x] [/b] [/ox] [/u[:script] [/r:directory] [/e:command]

Parameters 

/s:sourcepath
Specifies the location of the Windows NT files. 
/i:inf_file
Specifies the filename (no path) of the setup information file. The default is DOSNET.INF.
/t:drive_letter
Forces Setup to place temporary files on the specified drive.
/x
Prevents Setup from creating Setup boot floppies. Use this when you already have Setup boot floppies (from your administrator, for example).
/b
Causes the boot files to be loaded on the system's hard drive rather than on floppy disks, so that floppy disks do not need to be loaded or removed by the user.
/ox
Specifies that Setup create boot floppies for CD-ROM installation.
/u
Upgrades your previous version of Windows NT in unattended mode. All user settings are taken from the previous installation, requiring no user intervention during Setup.

/u:script
Similar to previous, but provides a script file for user settings rather than using the settings from the previous installation.
/r:directory
Installs an additional directory within the directory tree where the Windows NT files are installed. Use additional /r switches to install additional directories.
/e:command
Instructs Setup to execute a specific command after installation is complete.